Header Wrap Stainless Steel Locking Ties 26.8" Set of 4 Review

Average Reviews:

(More customer reviews)You cannot tighten these enough the way they are designed. I would rather just use some hose clamps instead. They are sharp as hell too! Waste of money in my opinion.

Click Here to see more reviews about: Header Wrap Stainless Steel Locking Ties 26.8" Set of 4

Click here for more information about Header Wrap Stainless Steel Locking Ties 26.8" Set of 4

Read More...

DEI 050502 4' x 21" Floor And Tunnel Shield - 7 sq.ft Review

Average Reviews:

(More customer reviews)I used this product to wrap the exhaust pipes near my rear differential that had a problem with whining noise when hot. Now the excess heat from the exhaust doesn't heat up the rear end and it is MUCH quieter meaning this stuff really works well.

Click Here to see more reviews about: DEI 050502 4' x 21" Floor And Tunnel Shield - 7 sq.ft

Get 25% OFF

Click here for more information about DEI 050502 4' x 21" Floor And Tunnel Shield - 7 sq.ft

Read More...

1997-2009 SUZUKI GSXR600: DEI STAINLESS STEEL LOCKING TIES 8in 8PK Review

Average Reviews:

(More customer reviews)Used these after wrapping up my tubular exhaust manifold. At first I was skeptical since it didn't seem to apply much clamping force, but they hold up just fine. They're very thin and don't stand out when compared to traditional worm gear clamps. Easy to put on and adjust position of pinch so that it's out of sight. When installing clamps I used a flat head screw driver to hold the pinch area and tugged on the slack end with pliers. This ensures that it's as tight as possible. Was it necessary? Probably not, but I did it anyways. The tubing diameter I used these on are 2".

Click Here to see more reviews about: 1997-2009 SUZUKI GSXR600: DEI STAINLESS STEEL LOCKING TIES 8in 8PK

Get 50% OFF

Click here for more information about 1997-2009 SUZUKI GSXR600: DEI STAINLESS STEEL LOCKING TIES 8in 8PK

Read More...

DEI 050501 2' x 21" Floor and Tunnel Shield - 3.5 sq. ft Review

Average Reviews:

(More customer reviews)This is robust heat shielding. It almost can't be cut with scissors. HVAC shears would be better. I bought it to shield heat on my boat in the engine compartment..works great!

Click Here to see more reviews about: DEI 050501 2' x 21" Floor and Tunnel Shield - 3.5 sq. ft

Get 13% OFF

Click here for more information about DEI 050501 2' x 21" Floor and Tunnel Shield - 3.5 sq. ft

Read More...

Mr. Gasket 3678 Starter Motor Heat Shield Review

Average Reviews:

(More customer reviews)Had a Heat Soak problem on my 1974 Corvette 350
THIS Solved the problem and was easily installed .
Excellent product.... Highly recomended to others
I'm going to get a couple more for my other vehicles.
GmcBillJ

Click Here to see more reviews about: Mr. Gasket 3678 Starter Motor Heat Shield

Get 34% OFF

Click here for more information about Mr. Gasket 3678 Starter Motor Heat Shield

Read More...

DEI 010405 1" Aluminized Sleeving (Velcro) Heat Shroud - 36" Review

Average Reviews:

(More customer reviews)Very good to protect under hood wires and hoses.
Installs without having to remove the hoses
Diameter cannot be adjusted

Click Here to see more reviews about: DEI 010405 1" Aluminized Sleeving (Velcro) Heat Shroud - 36"

Get 24% OFF

Click here for more information about DEI 010405 1" Aluminized Sleeving (Velcro) Heat Shroud - 36"

Read More...

Cobra Universal Heat Shields - 2"/Chrome Review

Average Reviews:

(More customer reviews)Great for slip-ons. Braces the pipes well while looking nice. I tried clamps after losing one slip on but they didn't look good so I tried these heat shields and it gave it a much better appearance. The exhaust pipes have a nice unique style to it. I don't believe you will be disappointed. Worth the price and glad somebody made these

Click Here to see more reviews about: Cobra Universal Heat Shields - 2"/Chrome

Get 10% OFF

Click here for more information about Cobra Universal Heat Shields - 2"/Chrome

Read More...

Thermo-Tec 12003 Copper High Heat Wrap Coating Review

Average Reviews:

(More customer reviews)I used the high heat paint on the header wrap as recommend. One thing I would highly suggest that when you start your car that you let it idle for a while before driving it unless your driving along a highway for a long distance. I made that mistake and smoke poured out from the engine compartment while I was sitting at a light. I am pretty sure it was the paint that was causing the smoke and the smell wasn't great either. I had to apply a second layer of wrap over the first layer, long story, but the original layer was in okay condition and I'm not sure if the paint helped as it had only been a few months since I put the first layer on.

Click Here to see more reviews about: Thermo-Tec 12003 Copper High Heat Wrap Coating

Click here for more information about Thermo-Tec 12003 Copper High Heat Wrap Coating

Read More...

Vulcan Titanium Ultimate Exhaust Header Wrap 2X25 Lava Fiber Kit Review

Average Reviews:

(More customer reviews)this item is very good, the color match the pics, and easy to install
but dont make a mistake is only 25 feet long, 2 rolls of 12.5 feet, not 2 of 25 feet
other than that im very happy with my new old skool look

Click Here to see more reviews about: Vulcan Titanium Ultimate Exhaust Header Wrap 2X25 Lava Fiber Kit

Click here for more information about Vulcan Titanium Ultimate Exhaust Header Wrap 2X25 Lava Fiber Kit

Read More...

Thermo-Tec 13500 12" X 12" Adhesive Backed Heat Barrier Review

Average Reviews:

(More customer reviews)I got this as I had a wideband O2 sensor put in, and the wire for it ran close to the exhaust manifold piping, and I didn't want it to melt on me. I cut a 2*6 inch square and wrapped it around the wire, and 3 months later it's still there and no problems.
I think I got a generous amount for what I paid. I can't comment as to whether the adhesive will hold up if stuck to the chassis, but it wrapped around my wire and holds there.

Click Here to see more reviews about: Thermo-Tec 13500 12" X 12" Adhesive Backed Heat Barrier

Click here for more information about Thermo-Tec 13500 12" X 12" Adhesive Backed Heat Barrier

Read More...

HeatShield 315041 HP Color Exhaust Wrap Red 2" Wide x 25' Exhaust Wrap Review

Average Reviews:

(More customer reviews)Love it. Wrapped my old chrome motorcycle pipes with the red tape.... Looks mean! I work with fiberglass for a living so it doesn't bother me. However if you do not, wear long sleeves and gloves. Very itchy stuff. My girl friend whined for hours after we wrapped my pipes.

Click Here to see more reviews about: HeatShield 315041 HP Color Exhaust Wrap Red 2" Wide x 25' Exhaust Wrap

Get 29% OFF

Click here for more information about HeatShield 315041 HP Color Exhaust Wrap Red 2" Wide x 25' Exhaust Wrap

Read More...

DEI 010201 8" Stainless Steel Locking Ties - Pack of 8 Review

Average Reviews:

(More customer reviews)I bought these ties to hold the exhaust wrap I installed on my motorcycle. I could not get the ties very tight. I tried everything to get them to really cinch down where they would not eventually slide or roll down. Being winter I have not had a chance to ride much to see how much they are going to move but it was difficult.

Click Here to see more reviews about: DEI 010201 8" Stainless Steel Locking Ties - Pack of 8

Get 36% OFF

Click here for more information about DEI 010201 8" Stainless Steel Locking Ties - Pack of 8

Read More...