Megan Racing MR-SSH-D16 Headers Review

Average Reviews:

(More customer reviews)Before I install this header my Honda Civic 94 was slow when it accelerate on the freeway or on the signal light. Now that I installed this header I always have a smile on my face. This header is amazing its like I have awaken the true power of the engine with a few modification. My Honda have 222,000 miles and it just came to life with this header; also I have cold air intake which adds to its power. I don't want to be a "ricer" as they say in MOD world; all I want with this car is to maximize its true power with out any turbo or supercharge. I know I wouldn't get much out of four cylindrical 1.6 literal SOHC, but I'm okay with that. I'm using my car as a daily commute and it racks up lots of mileage every single day.
So, if you want a little bit of power on your old Honda like mines with a budget price get this one or find other else that's much less......good luck!!!!
Oooooh.......what I for got to mention about that package is that it doesn't come with a manual.....come on Megan people......you can buy a lamp in Walmart with a manual why not in this header.......they think we can figure it out alone!!!!

Click Here to see more reviews about: Megan Racing MR-SSH-D16 Headers

Get 10% OFF

Click here for more information about Megan Racing MR-SSH-D16 Headers

Read More...

DUBACH / DR.D EXH SS RUCKUS/METRO 50 2575 Review

Average Reviews:

(More customer reviews)I ordered this exhaust last season. It was simple to install once I found the right tools. The first thing I noticed is the exhaust note is great. My Metro now sounds like a big bike. I get funny looks from cars beside me at lights, then I see them in my rearview (for about 10 seconds).
There is a noticeable increase in power, but I think there might need to be some carb jetting done to make the most of this.
Overall I am very happy with this purchase.

Click Here to see more reviews about: DUBACH / DR.D EXH SS RUCKUS/METRO 50 2575

Get 21% OFF

Click here for more information about DUBACH / DR.D EXH SS RUCKUS/METRO 50 2575

Read More...

Bosch 13371 Oxygen Sensor, OE Type Fitment Review

Average Reviews:

(More customer reviews)This Sensor fit perfectly and as all Bosch products is of Great Quality. It only makes Sense to buy this Sensor over others because of the Quality and Price.

Click Here to see more reviews about: Bosch 13371 Oxygen Sensor, OE Type Fitment

Get 59% OFF

Click here for more information about Bosch 13371 Oxygen Sensor, OE Type Fitment

Read More...

NGK 24546 Oxygen Sensor - NGK/NTK Packaging Review

Average Reviews:

(More customer reviews)Arrived a few days early, came with factory plug harness and very easy to install, I would recommend and buy another if I was to buy again.

Click Here to see more reviews about: NGK 24546 Oxygen Sensor - NGK/NTK Packaging

Get 34% OFF

Click here for more information about NGK 24546 Oxygen Sensor - NGK/NTK Packaging

Read More...

Magnaflow 22642 Direct Fit Catalytic Converter (Non CARB compliant) Review

Average Reviews:

(More customer reviews)This cat delivers as promised. I changed out the old one and replaced the O2 sensor. No more check engine light. I only gave it four stars because it really should come with gaskets and bolts.
If you're going to do this yourself please go to your Honda dealership and buy the two gaskets required, they're about $10 each. Assuming the converter is old and rusted, you will not be able to reuse them. They're round hollow rings and are most likely rusted into their slots, one at the end of the flex pipe leading into the cat and one at the exit of the cat itself. Same with the bolts, the converter I replaced had the studs welded to it and could not be reused. Go to the hardware store and buy six sets of 3/8" x 1 1/2" long bolts & nuts (another $10.)
Also, it's highly recommended to replace the O2 sensor when replacing the cat. I bought the Bosch 13071. This turned out to be about 6" too long and is probably the correct part for the one in the manifold. I just put a loop in it. The correct sensor is probably the 13075. The reviews for the 13075 have people complaining it's too short. I assume they tried to use the short one meant for the cat in the manifold.

Click Here to see more reviews about: Magnaflow 22642 Direct Fit Catalytic Converter (Non CARB compliant)

Get 64% OFF

Click here for more information about Magnaflow 22642 Direct Fit Catalytic Converter (Non CARB compliant)

Read More...

Magnaflow 15642 Stainless Steel 2.25" Single Cat-Back Exhaust System Review

Average Reviews:

(More customer reviews)this item did not fit my 98 honda civic hatchback perfectly and i wasted awhole day working on my car for nothing!

Click Here to see more reviews about: Magnaflow 15642 Stainless Steel 2.25" Single Cat-Back Exhaust System

Get 30% OFF

Click here for more information about Magnaflow 15642 Stainless Steel 2.25" Single Cat-Back Exhaust System

Read More...

Dorman OE Solutions Exhaust Manifold 674-439 Review

Average Reviews:

(More customer reviews)This is my second Dorman manifold. I put the first one in a 1997 Honda Civic LX and the Second in a 1999 Honda Civic LX. The instructions are very general and are made for all of the different combinations of exhaust manifolds and catalytic converters. They say there are serrated flange nuts to attach the two parts but all I found in the box were normal grade 5 nuts. I purchased a few flange nuts and everything went together easily. There are also nuts and bolts included to attach a heat shield. On this catalytic converter the heat shield was pre-attached
Installation was pretty easy. The lower oxygen sensor was completely seized on both cars and had to be replaced. If you live in the rust belt expect to replace it. The Dorman is a little slimmer than the OEM version so it slides into place easily. Use a torque wrench so you don't crack the manifold. The car is much quieter now. The first installation took about 4 hours and two trips to the auto store and the second was only 2 hours with no trips. Overall, a good product and much less expensive than anything else around.

Click Here to see more reviews about: Dorman OE Solutions Exhaust Manifold 674-439

Get 50% OFF

Click here for more information about Dorman OE Solutions Exhaust Manifold 674-439

Read More...

3A Racing 62-1106 Stainless Exhaust Tip Oval 3-1/4" X 5" Review

Average Reviews:

(More customer reviews)I purchased 2 for my 2004 Accord V6. Took 5 minutes to install, very attractive and easy to maintain. All my neighbors noticed & like them. The left one was missing after a month, I think someone stole it at the parking lot so I ordered another one to replace it. This time, I super glue the screws.
The price is right and the shipping is fast. I will definitely buy them for my next car.

Click Here to see more reviews about: 3A Racing 62-1106 Stainless Exhaust Tip Oval 3-1/4" X 5"

Click here for more information about 3A Racing 62-1106 Stainless Exhaust Tip Oval 3-1/4" X 5"

Read More...